Instruction Manual Genny 2.0
Urban(English)
Document code
Pag.
of
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
3
46
01
23/07/13
23/07/13
Persons in charge of the company departments in which the machineis to be used are obliged, in
compliance with statutory legislation, to read this manual carefully and ensure that it is read by
operators and maintenance technicians (in relation to their relative duties).
The time taken for this task will be greatly rewarded by the ability to use the machine in a safe,
correct manner.
This document assumes that in the plant, i.e. the place where the machine will be used, the current heath and
safety regulations are fully observed.
The instructions, the designs and the documentation in this Manual are of confidential and technical nature,
remain exclusive property of the Manufacturer and cannot be reproduced in any way, either entirely or
partially, irrespective of the system utilized.
The customer has the responsabilityto make sure that, if this document is modified by the Manufacturer, only
the updated versions of the Manual are available for consultation in the locations where the machine is used.
Moreover this manual has been drawn up in order to provide indications and warnings to know the supplied
machine to fully understand its operating principals and its limits.
This User Instruction Manual has been created exclusively for the customers of the Company GM Distribution
S.r.l. and contains information retaining intellectual property rights.
The text, designs and diagrams that are in this User Instruction Manual are of confidential and technical
nature, remain the property of GM Distribution S.r.l. and cannot be reproduced or copied in any way, either
entirely or partially.
Before performing any operations on the machine, the user has to carefully read this Manual.
This part is an essential and integral part of the machine. It containts important information and
knowing this information is fundamental to be able to act correctly and in completely safe
conditions.
The machine needs to be used only for the purpose it was specificlydesigned, programmed and
sold for.
Any use of the machine that differs from the indications in paragraph 2.6 is to be considered
unproper and therefore the Manufacturer declines any reposibility for it.
The Manufacturercan not be held responsible for every possible defect caused by an unreasonable,
unproper and/or incorrect use.
For any clarification, please contact the technical department of GM Distribution S.r.l..
The User needs to
very carefully read and fully understand
the informations in this User Manual, as a
correct preparation, installation, use and maintenance of the machine are the basis the user - Manufacturer
relationship
In case of doubts concerning the correct interpretation of the instructions, consult the Manufacturer of the
machine for necessary explanations.
