Instruction Manual Genny 2.0
Urban(English)
Document code
Pag.
of
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
11
46
01
23/07/13
23/07/13
h.
A = Risk Analysis
i.
PPE = Personal Protective Equipment
j.
RR = Residual Risk
k.
EP = Electrical Cabinet
l.
BM = on board machine
m.
NC = non-conformity
n.
FG = fixed guard / s
o.
MG= mobile guard(s)with micro switch without Yale key, mounted on hinges or on a profiled cam, to
prevent tampering / reclosing with additional keys.Ideally the micro switches should be installed in the
area inside the guards and/or covered with metal panels.
p.
MG + B= mobile guard(s) + mechanical lock and release with electric impulse (micro switch with
electric lock).Do not use safety micro switches with lock and / or release with Yale type key. Such
guards must be installed inside the machine danger zone key for unlocking mounted alongside them
in order to avoid the risk of becoming trapped in the machine.
The revision and printing dates of the manual and the current revision level are shown at the foot of
each page.
ORIGINAL INSTRUCTIONS - (PLEASE KEEP FOR FUTURE REFERENCES)
CAP. 2.
GENERAL INFORMATION AND FEATURES
2.1. PRE-DELIVERY TESTS
Prior to delivery, all the installed components are subjected to careful visual inspections and instrumental
checks in orderto guaranteecompliance with normative provisions and contractual specifications.
Meticulous observance of our instructions will ensure that in normal operating conditions and when used
correctly, your machine will provide lasting and reliable operation.
2.2. TECHNICAL FEATURES
2.2.1. AIM
– PURPOSE - MANUFACTURING PARTS
The electric wheelchair, hereinafter called the "machine", is an electrically powered wheelchair, destined for
use by a person of age.
The machine is a self-balancing personal mobility device with n. 2 wheels and a self balancing system which
incorporates a support for a seat forn. 1user of age, propelled by 2 electric motors controlled by the user who
electronically or manually commands speed and direction.
The machine moves by detecting the movements of the body and so the correct position on the bodyallows
full control.
The automatic functions,programming and operating sequence of the machine are managed by the
electromechanical components in hard-wired logic and by a PLC.
It is possible to equip the machine with authorized accessories, contact your authorized service centre or visit
www.gennymobility.com for available accessories.
