Instruction Manual Genny 2.0
Urban(English)
Document code
Pag.
of
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
23
46
01
23/07/13
23/07/13
signature
FACSIMILE OF THE ORIGINAL
CAP. 4.
SAFETY INSTRUCTIONS
4.1. INTRODUCTION
Always observe the safety regulations.
The failure to observe rules and safety procedures can be a source of danger and harm to
personnel and the machine.
The safety instructions given in general in these User Instructions Manual are of general nature and, though
based on experience, do not extend to all situations that may occur.
These instructions complement and do not replace a constant application, by the purchaser of the machine, of
the basic security rules known to those working in the specific field.
It is therefore recommended to observe the rules for safety and prevention already set and applied in the
location where the machine will be used.
This chapter highlights the residual risk on the machine despite the correct application of design and safety
standards and safety, it also shows the modalities to be followed by the purchaser in order to reduce and/or
eliminate the highlighted residual risks.
The use (operation and maintenance) of the machineis constrained
in respect of:
1. all rules concerning integration in the environment and behavior of people, established by law
and / or applicable standards
2. all warnings and instructions for use that are part of the technical documentation / graphics that
accompany the machine itself.
The machine must be
handled, protected, used, maintained and eventually dismantled
(after it is no
longer used), so as to avoid danger, as far as is reasonably possible, to persons, animals or objects and one
must ensure the necessary maintenance.
