Manualedelleistruzioni per l’uso
Document code
Pag.
di
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
16
18
00
23/07/13
23/07/13
BALANCE MODE ERROR CONDITIONS
If you unsuccessfully attempt to enter Balance Mode the icon shown in
the table
will appear on the InfoKey
Controller.
To clear this condition, follow the instructions in the Recommended Action column.
Displayed Icon
Description
Recommended Action
During the Re-entering of the
stabilizing parking legs the
sensors are not depressed
correctly and the Rider detect
sensor is not depressed
contemporarily. The LeanSteer
Frame is tilted when attempting
to enter Balance Mode.
Repeat the procedure for re-entering
stabilizing parking legs while keeping the
LeanSteer frame in front of you.
REDUCED PERFORMANCE LEVELS
When the machine is operating at reduced performance levels dueto an error condition, the icon shown in
the
table
will appear on theInfoKey Controller. See
“Speed Limiter”
for a list of theconditions that cause reduced
performance.
To clear this condition, follow the instructions in the RecommendedAction column
Display Icon
Description
Recommended Action
The machine is operating at
reduced performance levels,
with the speed limit lowered, due
to a temporary condition.
The machine’s Speed Limiter is an
alert that you are moving too fast. When
the Speed Limiter pushes the Handlebar
back, stop leaning forward and slow
down. Always leave a gap between
yourself and the Handlebar.
Once you slow to a speed that the
machine determinesis safe, it will resume
normal functioning.
CRITICAL FAULTS WHILE RIDING
During normal riding, if the machine detects a fault in any of its redundant subsystems, the icon shown in the
tablewill appear on the InfoKey Controller.
When such a fault is detected, machine performs a Safety Shutdown. When a Safety Shutdown occurs, the
machine automatically reduces its speed, gives the Stick Shake Warning(shakes the Handlebar and makes a
growling sound) and the InfoKey displays a Safety Shutdown icon. Asthe machine slows, it emits an audio alert.
Follow the instructions in the Recommended Action column
Display Icon
Description
Recommended action
The system has detected a
critical error in its redundant
subsystems and performs a
Safety Shutdown.
The rider has approximately 10seconds from
the start of a Safety Shutdown to come to a
controlled stop and deploythestabilizing
parking legs. After 10 seconds, the machine
will immediately shut downwhen the Wheels
reach zero speed.
