Manualedelleistruzioni per l’uso
Document Code
Pag.
di
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
25
31
00
23/07/13
23/07/13
STEP 8: COMING OFF
When you are ready to come off the machine for the first time, your spotter should hold the handle.
Remain stationary by keeping your weight centered over the Wheels and seat and keep the Handlebar vertical.
Before activating the stabilizing procedure (lowering the legs), ensure you are on a terrain that is as flat as possible and
completely stationary. The difference in height between terrain and entered parking legs is 5 cm.
Press again button 1 (front) to power on the Led bar and then carry out the sequence button 1
– button 2 (within 3
seconds). You find the buttons near the right handle. The lowering of the stabilizing legs is accompanied by a gentle ticking
sound.
The procedure that lowers the stabilizing legs is completed 5 seconds after both have touched ground. A beep notifies you
the procedure is completed.
Do not attempt to move while procedure is ongoing.
This could have serious consequences.
The lowering of the stabilizing legs is activated only when the machine is stationary.
To come off:
1. Power off the machine keeping the power on/standby button on the InfoKey Controller pressed for 2 seconds
2. Extract the Handlebar lifting it up while pressing the insert below the articulation.
