User instruction Manual
Document code
Pag.
di
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
1
13
00
23/07/13
23/07/13
CAP. 5.
TRANSPORT, INSTALLATION AND HANDLING
5.1. INSTALLER REQUISITES
The
installation
involves a range of important issues of a mechanical and
electric nature, so the installer must have a thorough knowledge (both
theoretical and practical) of the machine.
Specifically, the
person
responsible for
installing
the machine will be a
maintenance technician who should work in compliance with the following
aims:
1. limit the deterioration of parts subject to wear;
2. reduce accidents to the absolute minimum;
3. reduce costs arising from faults;
4. limit the number and duration of interventions;
5. work in collaboration with the line operators to improve the efficiency of the plant.
It is essential that, for
installation
activities performed by the user,
this task be assigned
to expert personnel
who are competent and authorized by the employer.
These
expert personnel must be
capable of assessing the work assigned to them, and
recognizing any possible hazards on the basis of their training, knowledge, and
professional experience and their knowledge of the machines in question, the relative
equipment and the applicable standards and legislation; they must also possess an
adequate professional qualification concerning the machines in question.
The personnel must also be
trained in safety matters
, and informed of the residual risks
as described in chapter 4 of this manual.
The personnel must also be
skilled rather than simply aware
, i.e. must be a high school
or university graduate with specific know-how concerning the machine and its equipment
and the relative standards and legislation, and must also have specific technical
knowledge and training.
In addition to performing all installation tasks:
1. he may access the electrical panel while the equipment is live;
2. he may access the dangerous areas of the machine, with the mobile guards open but
with the guarantee of no movements.
The personnel responsible for carrying out the operations described in this chapter must
not only have the characteristics set down in chapter 4, but must also have read and
understood the safety prescriptions given in
chapter 4
.
If the user
does not have suitably trained/expert/knowledgeable personnel
, an
installation
contract must be drawn up with a specialized firm, such as the machine
manufacturer.
