Manualedelleistruzioni per l’uso
Document Code
Pag.
di
Rev.
SAVE DATA
PRINT DATA
03-09-12_UIMG2 Manual ENG
12
31
00
23/07/13
23/07/13
6.4.4. SECURITY BUTTON FUNCTIONS
The following functions can be performed using the Security Button.
Enabling and Disabling the Security Function
1. To enable the Security Function, tap the Security button. The Security icon (lock) will show in the Display.
2. To disable the Security Function, tap the Security button. The Security icon (lock) will no longer show in the
Display.
The machine will only accept these commands when no Rider Detect Sensors are depressed (when the stabilizing parking
legs are deployed).
The Security Function includes an alarm and a mechanism that makes it difficult to move your machine and discourages
tampering. The best way to deter theft of your machine is to keep it in a secure indoor location with the InfoKey Controller
stored separately. If you must leave your machine unattended in a location that is not secure, enable the Security Function
and remain within audible range so you can respond, should the alarm sound.
6.4.5. BUTTON COMBINATION FUNCTIONS
The following functions require you to simultaneously push a combination of InfoKey Controller buttons.
Configuring and locking the beginner setting
For your first ride, the machine is set to operate exclusively with the Beginner Setting
enabled. If the Beginner icon (turtle) does not display, do NOT ride the machine until
you enable the Beginner Setting.
The machine ships from the factory with the Beginner Setting locked, to encourage new riders to learn using the Beginner
Setting. To unlock the Beginner Setting:
1. Power on the machine.
2. Press and hold the Beginner Button and the Information Display Button simultaneously for more than 10 seconds. The
Information Display button will flash.
3. Confirm that the Beginner icon (turtle) toggles when the Beginner button is tapped.
Once the Beginner Setting is unlocked, you can toggle the Beginner Setting on or off by tapping the Beginner button.
To lock the Beginner Setting:
1. Repeat Steps 1 and 2 above.
2. Confirm that the Beginner icon (turtle) is showing on the InfoKey Display.
3. Test the lock by tapping the Beginner button and confirming that the Beginner icon remains showing in the InfoKey
Display.
