Generalmusic WK3 World Keyboard, Руководство пользователя

Страница: 219 / 320

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Edit Drumkit 13•33
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Edit Drumkit 13•33
2/3 EFFECT (F5, F6)
Effect send which controls the amount of Ef fect
(modulated effects) applied to the percussive
sound. The Ef fect applied corresponds to the
type currently selected in the Effects DSP .
Zero level corresponds to the pure percussive
sound (Dry).
Increasing the parameter value increases the
amount of Effect applied, altering the W et/Dry
ratio until the percussive sound is fully effected
(Wet).
Check that the Effects button in the DSP section
is active (led on) to hear the changes applied to
the parameter.
Use the standard Drumkit edit procedure.
1/3 SOUND EDIT:STAND1 [EFFECT] E C4
Pan=R15 Rev=7 Eff=0
SOUND EDIT: Stand1 [Ef fect]
Assignable values: 0 … 15.
Press ESCAPE to return to the previous page,
or SOUND to exit Edit Sound.
Press STORE PERF + ENTER to store the modi-
fications to the current Performance.
DRUMKIT EXISTS
Once you have edited 4 percussive Sounds of
your Drumkit, you cannot edit other notes. At-
tempting to do so produces no results.
If you attempt to edit another Drumkit assigned
to the current Performance, the display warns you
that the edited Sounds memorised to the current
Performance already contains a Drumkit.
DRUMKIT EXISTS :
REPLACE (ENT) OR EXIT (ESC)
If the current Performance already contains 8
edited Sounds, and you to attempt to edit a
Drumkit, a warning activates informing you that
the Sound Edit is full. At this point, you can re-
place one of the edited Sounds with the Drumkit
that you wish to edit.
EDIT SOUND FULL! PRESS F1 AND SELECT
SOUND TO CLEAR
See page 23 of the Sound Edit chapter for full
details.
2/3 EFFECT (F5, F6)
Effect send which controls the amount of Effect
(modulated effects) applied to the percussive
sound. The Effect applied corresponds to the
type currently selected in the Effects DSP.
Zero level corresponds to the pure percussive
sound (Dry).
Increasing the parameter value increases the
amount of Effect applied, altering the Wet/Dry
ratio until the percussive sound is fully effected
(Wet).
Check that the Effects button in the DSP section
is active (led on) to hear the changes applied to
the parameter.
Use the standard Drumkit edit procedure.
1/3 SOUND EDIT:STAND1 [EFFECT] E C4
Pan=R15 Rev=7 Eff=0
SOUND EDIT: Stand1 [Effect]
Assignable values: 0 … 15.
Press ESCAPE to return to the previous page,
or SOUND to exit Edit Sound.
Press STORE PERF + ENTER to store the modi-
fications to the current Performance.
DRUMKIT EXISTS
Once you have edited 4 percussive Sounds of
your Drumkit, you cannot edit other notes. At-
tempting to do so produces no results.
If you attempt to edit another Drumkit assigned
to the current Performance, the display warns you
that the edited Sounds memorised to the current
Performance already contains a Drumkit.
DRUMKIT EXISTS :
REPLACE (ENT) OR EXIT (ESC)
If the current Performance already contains 8
edited Sounds, and you to attempt to edit a
Drumkit, a warning activates informing you that
the Sound Edit is full. At this point, you can re-
place one of the edited Sounds with the Drumkit
that you wish to edit.
EDIT SOUND FULL! PRESS F1 AND SELECT
SOUND TO CLEAR
See page 23 of the Sound Edit chapter for full
details.