Generalmusic WK3 World Keyboard, Руководство пользователя

Страница: 153 / 320

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Effects 9•1
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Effects 9•1
• 9 Digital Signal Processor
DIGITAL SIGNAL PROCESSOR
DIGITAL SIGNAL PROCESSOR
REVERBS
EFFECTS
EDIT
WK3 allows you to route the Performances (Style/
RealTime, Song/Style and Song Performances)
to the on-board multi-effects processor which
renders the overall sound more realistic.
The Digital Signal Processor section consists of
two units which process the Performances with
Reverbs and Delay/Modulation effects.
Each processor has an effects Send control to
independently regulate the level (volume) of the
effect for each track of the current Performance.
Also available is an effects editor which allows
you to modify the preset effects and save them
to the Performances.
The DSP section consists of three buttons:
Reverb When active (led on), the current
Performance is routed to the
Reverberation DSP to be processed
by the currently assigned effect type.
The overall sound is emitted “wet”
from the internal speakers and the
stereo Audio Outputs (Right/M-Left).
When off, the DSP is bypassed and
the Performance is emitted “dry”.
Effects When active (led on), the current
Performance is routed to the Delays/
Modulations DSP to be processed by
the currently assigned effect type.
The overall sound is emitted “wet”
from the internal speakers and the
stereo Audio Outputs (Right/M-Left).
When off, the DSP is bypassed and
the Performance is emitted “dry”.
Edit Gains access to the selection of the
effect types from both DSP units
(Reverbs, Effects) as well as the
controls for the effect sends (Rev
Send, Eff Send). The selection
window also shows the editor of the
current effect. The user-programmed
Reverb or Effect can be saved to the
current Performance.
General effects modifications that af fect the in-
strument as a whole (Reverb volume, Effects vol-
ume) are found in the «Edit General» environ-
ment (edit page 2).
• 9 Digital Signal Processor
DIGITAL SIGNAL PROCESSOR
DIGITAL SIGNAL PROCESSOR
REVERBS
EFFECTS
EDIT
WK3 allows you to route the Performances (Style/
RealTime, Song/Style and Song Performances)
to the on-board multi-effects processor which
renders the overall sound more realistic.
The Digital Signal Processor section consists of
two units which process the Performances with
Reverbs and Delay/Modulation effects.
Each processor has an effects Send control to
independently regulate the level (volume) of the
effect for each track of the current Performance.
Also available is an effects editor which allows
you to modify the preset effects and save them
to the Performances.
The DSP section consists of three buttons:
Reverb When active (led on), the current
Performance is routed to the
Reverberation DSP to be processed
by the currently assigned effect type.
The overall sound is emitted “wet”
from the internal speakers and the
stereo Audio Outputs (Right/M-Left).
When off, the DSP is bypassed and
the Performance is emitted “dry”.
Effects When active (led on), the current
Performance is routed to the Delays/
Modulations DSP to be processed by
the currently assigned effect type.
The overall sound is emitted “wet”
from the internal speakers and the
stereo Audio Outputs (Right/M-Left).
When off, the DSP is bypassed and
the Performance is emitted “dry”.
Edit Gains access to the selection of the
effect types from both DSP units
(Reverbs, Effects) as well as the
controls for the effect sends (Rev
Send, Eff Send). The selection
window also shows the editor of the
current effect. The user-programmed
Reverb or Effect can be saved to the
current Performance.
General effects modifications that affect the in-
strument as a whole (Reverb volume, Effects vol-
ume) are found in the «Edit General» environ-
ment (edit page 2).