page | 15
3.
Connect a CAT-5e cable (or better), up to 330 feet (100 meters) from each ELR-POL
jack on the Output card to each Receiver unit.
4.
Connect a DVI cable from the DVI Out port on each ELR-POL Receiver unit to a DVI
display.
5. Connect both AC power cords from the
8x8 Modular Matrix
to available electrical
outlets. Connecting both AC power cords will provide redundancy should one of
the power supplies fail. It is recommended to connect each power cord to electrical
outlets on two separate circuits.
Power to both the Sender and Receiver unit is delivered from the matrix over the
CAT-5e cable using Gefen Power Over Line (POL) technology. The Link indicator
will glow bright green to indicate a solid connection between the matrix and both the
Sender and Receiver units. The Power indicators will glow bright blue to indicate
that the Sender and Receiver units are being powered.
If either of these LED indicators are OFF, inspect the CAT-5 cable for loose
connections or possible defects.
Getting Started
Installation
GEF-DVI-ELRPOL-R
GEF-DVI-8ELR-S
CAT-5e cable
Up to 330 feet (100 meters)
DVI cable
DVI display
GEF-DVI-ELRPOL-R
