page | 76
Advanced Operation
RS-232 / IP Commands
#set_output_name
The
#set_output_name
command names the specified output. The name of the output
cannot exceed 20 characters in length
Spaces are not permitted when naming outputs. If
a space is
required, then use the underscore (“_”) character.
Syntax
:
#set_output_name param1 param2
Parameters
:
param1
Output
[1 ... 8]
param2
Name
Example
:
#set_output_name 7 Dell_24
Dell_24 is assigned to output 7
#set_preset_name
The
#set_preset_name
command names the specified preset. The name of the preset
cannot exceed 20 characters in length
Spaces are not permitted when naming presets.
If a space is
required, then use the underscore (“_”) character.
Syntax
:
#set_preset_name param1 param2
Parameters
:
param1
Preset
[1 ... 8]
param2
Name
Example
:
#set_preset_name 2 Studio51
Studio51 is assigned to preset 2
