page | 79
Advanced Operation
RS-232 / IP Commands
m
The
m
command displays the current matrix status in tabular form. The required DIP switch
settings for the IR remote control unit are also displayed, based on the current IR channel
of the matrix. Do not precede this command with the “
#
” symbol.
Syntax
:
m
Parameters
:
None
Example
:
m
Show the matrix status in tabular form
Routing status table
Outputs | +0 | +1 | +2 | +3 | +4 | +5 | +6 | +7
1 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8
Masking status table
Outputs | +0 | +1 | +2 | +3 | +4 | +5 | +6 | +7
1 | A | A | A | A | A | A | A | A
Monitor HPD status table
Outputs | +0 | +1 | +2 | +3 | +4 | +5 | +6 | +7
1 | L | L | L | L | L | L | L | L
RMT_IR - SW1=0,SW2=0
