page | 28
Routing Basics
Operating the 8x8 Modular Matrix
4.
Select the desired input (source) button (1 - 8). For this example, we want to route the
source connected to Input 2 to each of the outputs in step 3. Therefore, press
button
2
on the bottom row. The selected input will glow bright blue.
5. Press the
Set
button on the front panel, once again. Pressing the
Set
button again
tells the matrix that we have completed the routing operation. Once the
Set
button
has been pressed, the LCD will indicate that the routing process has been completed.
6. After a few moments, the selected buttons on the front panel will turn off and the LCD
will return to the Home screen.
ROUTING COMPLETE
GEFEN
MODULAR MATRIX
NOTE:
Only one input can be routed at a time. If the wrong input
button is accidentally pressed, then continue by pressing the correct
input button. The previously selected input button will automatically
be deselected.
ROUTING MODE
GEFEN
MODULAR MATRIX
