page | 47
Routing Sources using the IR Remote Control Unit
The 8x8 Modular Matrix can be controlled using the RMT-8IR IR remote control unit (not
included). The IR remote control unit consists of 8 buttons. To route a source to a display,
first press the button of the desired input, then press the button for the associated output.
In this example, we will route Input 5 to Output 3.
1. Point the IR remote at the IR sensor on the front panel of the matrix.
2.
Select the input by pressing button 5 on the IR remote control unit. The LED on the
IR remote control unit will flash bright yellow to indicate that a button was pressed.
3. Next, press the button for the desired output. In this example, we want to route
Input 5 to Output 3. Therefore, press button
3
on the IR remote control unit.
See the illustration on the next page.
Operating the 8x8 Modular Matrix
IR Control
GEFEN
MODULAR MATRIX
LED indicates a
button was pressed
IR sensor
Press button 5
