page | 88
Advanced Operation
RS-232 / IP Commands
#set_ir
The
#set_ir
command sets the IR channel of the matrix. In order for the included IR
remote control unit to function correctly with the matrix, both the matrix and the IR remote
must share the same IR channel. After executing this command, the DIP switch settings
for the included IR remote control unit are returned. See
Setting the IR Channel
for
information on setting the IR channel on the IR remote control unit.
Syntax
:
#set_ir param1
Parameters
:
param1
IR channel
[0 ... 3]
Example
:
#set_ir 2
RMT_IR - SW1=0,SW2=1
