page | 27
Routing Inputs to Outputs
The following example illustrates the routing process. An input may be routed to a single or
multiple outputs. Multiple inputs cannot be routed to a single output.
1. Press the
Set
button on the front panel. Pressing the
Set
button tells the matrix that
we want to perform a routing, masking, or preset operation. The
Set
button will glow
bright blue, indicating that it has been pressed.
2. The LCD on the front panel will indicate that routing mode is active.
3.
Press the desired output button(s) (1 - 8). For this example, we will route the
input (covered in the next step) to multiple outputs: Output 1, Output 3, Output 5,
and Output 6. Press buttons 1, 3, 5, and 6. The selected buttons will glow
bright blue.
ROUTING MODE
ROUTING MODE
Operating the 8x8 Modular Matrix
ROUTING MODE
Routing Basics
