page | 63
RS-232 / IP Commands
Advanced Operation
#set_bank_name
The
#set_bank_name
command
sets the name of the specified EDID bank.
The bank cannot exceed 20 characters in length. Spaces are not permitted when
naming EDID banks. If a space is required, use the underscore (“_”) character.
Use the
#show_bank_name
command to display the specified bank name.
Syntax
:
#set_bank_name param1 param2
Parameters
:
param1
EDID bank
[1 ... 20]
param2
Name
Example
:
#set_bank_name 3 Dell_30”
Dell_30” is assigned to bank 3
#show_bank_name
The
#show_bank_name
command displays the name of the specified EDID bank.
Use the
#set_bank_name
command to set the name of the EDID bank.
Syntax
:
#set_bank_name param1 param2
Parameters
:
param1
EDID bank
[1 ... 20]
Example
:
#show_bank_name 3
Bank 3 - Dell_30”
