Back Panel
ID
Name
Description
1
IP Control
Connect an Ethernet cable between
this port and a LAN to use IP control.
See
IP / UDP Configuration
for more
information.
2
RS-232
Connect the included RS-232 cable from this
port to an RS-232 device. See
RS-232 and
IP Configuration
for more information.
3
IR
Connect an IR Extender (Gefen part no.
EXT-RMT-EXTIRN).
4
Power
This LED indicator will glow bright blue
when the matrix / board is powered.
5
Power supply
100 - 240V AC internal hot-swappable power
supply.
6
IEC connector
Connect the included AC power cords
from these power receptacles to available
electrical outlets.
7
Grounding terminal
Connect a grounding wire from the grounding
terminal to an approved ground path.
8
Out
This expansion bay accepts Output cards,
only.
9
In
This expansion bay accepts Input cards,
only.
page | 7
Getting Started
Panel Layout
8
4
1
2
3
4
5
5
6
7
6
9
