page | 42
3.
Select the desired input where the EDID will be stored. We will arbitrarily select
Input 4, by pressing button
4
.
4. Press the
Set
button. The
Set
button will flash momentarily.
5. Once the
Set
button is pressed, the matrix will begin copying the downstream EDID
from the display (or other sink) to the EDID from the selected output to the specified
input.
The LCD will indicate that the matrix is copying the EDID:
6.
After the EDID has been successfully copied to the selected input, the LCD will
display the following message:
EDID Management
Operating the 8x8 Modular Matrix
EDID LOADING
PLEASE WAIT
EDID LOADING
COPY COMPLETE
EDID LOADING
PLEASE WAIT
Set button
EDID DSTOLO MODE
