page | 75
Advanced Operation
RS-232 / IP Commands
#savepreset
The
#savepreset
command saves the current routing and masking state to a specified
preset. To restore a saved preset, use the
#callpreset
command.
Syntax
:
#savepreset param1
Parameters
:
param1
Preset
[1 ... 8]
Example
:
#savepreset 2
Current routing state is saved to preset
#set_input_name
The
#set_input_name
command names the specified input. The name of the input
cannot exceed 20 characters in length.
Spaces are not permitted when naming outputs.
If a space is
required, use the underscore (“_”) character.
Syntax
:
#set_input_name param1 param2
Parameters
:
param1
Input
[1 ... 8]
param2
Name
Example
:
#set_input_name 4 signal_generator
signal_generator is assigned to input 4
