page | 31
Saving the Current Routing State
The
8x8 Modular Matrix
allows routing (and masking) states to be saved to internal
non-volatile memory. Each routing state can be recalled at a later time (see
page 33
).
Even if the matrix is powered OFF, the presets will be retained in memory.
We’ll illustrate an example by saving the routing state, created on
page 27
.
1. To make sure we are saving the correct routing state, press the button for Input 2 on
the front panel. The following routing state should be displayed:
This is the routing state we created, under the section
Routing Inputs to Outputs
.
2. Press the
Cancel
button to hide the displayed routing state. The
Cancel
button will
flash momentarily when pressed.
3. Press the
PreSet
button,
twice
.
The LCD will indicate that the matrix is in
save preset mode
:
Routing Basics
Operating the 8x8 Modular Matrix
PRESET MODE
SAVE CURRENT SET
GEFEN
MODULAR MATRIX
PRESET MODE
SAVE CURRENT SET
