page | 48
4. On the front panel of the matrix, the
Set
button, along with the selected input and
output, will glow bright blue.
5. Input 5 has now been routed to Output 3.
6. After a few moments, the
Set
button and the associated buttons for the routed input
and output will turn off.
Using the IR Extender
There may be situations where the IR sensor is blocked by a cabinet or other mounting
device. In this case, an IR extender (Gefen part no. EXT-RMT-EXTIR) can be connected
to the IR port on the back of the matrix (see the section
Back Panel
). The sensor on the IR
extender behaves exactly like the sensor on the front panel of the matrix.
IR Control
Operating the 8x8 Modular Matrix
GEFEN
MODULAR MATRIX
Press button 3
