GEF-MOD-848-DVI
1. Connect up to 8 DVI sources to the DVI inputs on the rear panel of the 8x8
Modular Matrix using DVI cables.
2. Connect up to 8 DVI displays to the DVI outputs on the rear panel of the 8x8 Modular
Matrix.
3. Connect both AC power cords from the 8x8 Modular Matrix to available electrical
outlets. Connecting both AC power cords will provide redundancy should one of
the power supplies fail. It is recommended to connect each power cord to electrical
outlets on two separate circuits.
GEF-MOD-848-DVIELR
1. Connect up to 8 DVI sources to the DVI inputs on the rear panel of the
8x8
Modular Matrix
using DVI cables.
2.
Connect a CAT-5e cable (or better), up to 330 feet (100 meters) from each ELR-POL
jack on the Sender card to each of the included ELR-POL Receiver units, as shown
below.
3.
Connect a DVI cable from the DVI Out port on each ELR-POL Receiver unit
to a DVI display. See the illustration on the next page.
page | 12
Getting Started
Installation
CAT-5e cable
Up to 330 feet (100 meters)
