page | 66
Advanced Operation
RS-232 / IP Commands
#set_tcp_term_pass
The
#set_tcp_term_pass
command sets the TCP terminal password. The default
password is
Admin
. The matrix must be rebooted after executing this command.
The password cannot exceed 20 characters in length.
Syntax
:
#set_tcp_term_pass param1 param2 param3
Parameters
:
param1
Old password
param2
New password
param3
New password (confirmation)
Example
:
#set_tcp_term_pass Admin reindeer reindeer
TCP Terminal password updated to: reindeer
#set_tcp_term_port
The
#set_tcp_term_port
command sets the TCP terminal server listening port.
The matrix must be rebooted after executing this command. The default port setting is
23
.
Syntax
:
#set_tcp_term_port param1
Parameters
:
param1
Port
[1 ... 65535]
Example
:
#set_tcp_term_port 21
New TCP Terminal port set to: 21
