GE Vivid S70, Руководство пользователя

Страница: 697 / 709

System Care and Maintenance
Vivid S70 / S60
–
User Manual
15-7
BC092760-1EN 01
5. Insert the trackball into the housing.
6. Place the dust filtering ring and the top locking ring.
7. Rotate the top locking ring clockwise to lock it in place.
Probe holder
1. Apply cleaning agent to a soft, non-abrasive folded cloth.
The cloth should be damp, not dripping wet.
2. Clean the probe holders to remove all traces of gel.
3. Wipe off excess cleaning agent and allow to dry.
System cabinet
To clean the system cabinet:
1. Apply cleaning agent to a soft, non-abrasive folded cloth.
The cloth should be damp, not dripping wet.
2. Wipe down the top, front, back and both sides of the
cabinet. Do not spray any liquid directly onto the system.
3. Wipe off excess cleaning agent and allow to dry.
Footswitch
To clean the footswitch:
1. Apply cleaning agent to a soft, non-abrasive folded cloth.
The cloth should be damp, not dripping wet.
2. Wipe the external surfaces of the footswitch and allow to
dry.
Cleaning the probes
Refer to the Probes chapter, section for probe cleaning and
disinfecting instructions.
Prevention of static electricity interference
Interference from static electricity can damage electronic
components in the system. The following measures help to
reduce the likelihood of electrostatic discharge:
• Wipe the alphanumeric keyboard and monitor with lint-free
tissue or a soft cloth dampened with anti-static spray on a
monthly basis.
• Spray carpets with anti-static spray because constant
walking on carpets in or near the scanning room may be a
source of static electricity.