GE Healthcare
Senographe DS Acquisition System
Revision 1
Operator Manual 5307907-3-S-1EN
Control Station
5-aws.fm
Page no. 47
Chapter 5
5-4
Scroll Bar
A scroll bar is an on-screen tool that you use to page through data that cannot be fully displayed at once
on the screen or in a particular window, such as lists of patients or exams in the Browser.
•
To move through the data controlled by the scroll bar (images, items in a Browser list, etc.),
you can place the cursor on the vertical rectangular bar within the scroll bar.
Then, press and hold the left mouse button, and drag the cursor up or down to move back-
ward or forward through the list. The vertical bar within the scroll bar shows you where you
are within the list as compared to the list as a whole.
Release the mouse button when the desired data are displayed.
•
If you wish to move through the data one item at a time, place the cursor on either the upper
or lower arrow and click the left mouse button. Each click moves you up or down by one item
of the data.
•
If you wish to move through the data one page at a time, place the cursor either above or
below the vertical bar and click the left mouse button. Each click now moves you up or down
by one page of data.
A scroll bar becomes active only if the display capacity of the list is exceeded. Otherwise, the vertical bar
fills the full height of the scroll bar, and clicking on the vertical bar or the arrows has no effect.
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
