manualshive.com logo in svg

GE Multilin W650, Инструкция по эксплуатации

Инструкция по эксплуатации GE Multilin W650 является необходимой для эффективного использования этого продукта. Вы можете скачать руководство бесплатно с нашего сайта. Этот мануал поможет вам освоить все функции и возможности устройства. Не забудьте загрузить его с manualshive.com.

Поделиться
Скачать
background image

GEK-113032A

W650 Wind Generator Protection System

4-31

4 HUMAN INTERFACES.

4.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE

4

or Set calibration settings”

 and select the intended calibration file. The calibration retrieval process is necessary to

be performed before updating the unit operative system, when the operating system is updated all the data in the relay
is deleted, including the factory calibration settings. When only the firmware is updated (for versions higher than 1.50),
the calibration settings are automatically saved in the relay.

•

Upgrade firmware version (Ethernet connection): Go to 

“Communications>Upgrade firmware version”

, this menu

allows the user to update the firmware version of the relay through Ethernet communication. Firmware is related to the
relay internal program, designed by GE Multilin, which performs the protection and control functions, and which is run
by the relay main microprocessor.

•

Upgrade operating system (Serial and Ethernet connection): Go to 

“Communications>Upgrade operating system”

.

This option allows the user to update the relay operative system. The operative system or OS is the program that
supports the firmware and provides auxiliary services for access to electronic devices included in the relay.

IMPORTANT NOTE:

 

Thanks to the use of a double flash memory, one with the Bootcode startup program and the operative system, and a
second one with the application program (firmware), a high reliability is guaranteed when updating the unit firmware, as
even if the case of a communication breakdown during the firmware upgrade process, we can retry the process for an
unlimited number of times.

•

Upgrade 650 web server (Ethernet connection): Go to 

“Communications> Upgrade 650 web server”

. The relay web

server application can be updated to further versions (if available) using this menu without modifying the relay
operative system.

•

Upload info files to relay (Ethernet connection): Go to 

“Communications>Upload info files to relay”

. This

functionality is used to store setting files (*.650) inside the relay, as well as auxiliary files used by the programmable
logic graphical editor (*.pep, *.aut, *.lib).

•

Download info files from relay (Ethernet connection): Go to 

“Communications>Download info files from relay”

.

This functionality is used for retrieving the files (*.650 and *.pep, *.aut, *.lib) that have been previously stored in the
relay flash memory.

Important Note: 

READ CAREFULLY THE FLASH MEMORY UPDATE PROCEDURE DESCRIBED IN
SECTION 9 AND CLOSE ALL THE RUNNING APPLICATIONS BEFORE
PERFORMING FIRMWARE AND OPERATIVE SYSTEM UPDATING PROCCESS

Before updating firmware check that the firmware version that is going to be updated
match the operative system version of the relay. Otherwise it is necessary to update the
operative system before proceeding to update the firmware. Other combinations of
firmware and operative system different from the listed below will not be operative

The operative system version is available in the logotype main screen in HMI; it is the
number between brackets in the first line, e.g. W6501.70 (2.35). The operative system
version is 2.35

Firmware version up to 1.5X must be used with Boot Code 2.30 (or 2.20 and 2.35)

Firmware version from 1.6X up to 1.8X must be used with Boot Code 2.35

Firmware version 2.00 must be used with Boot Code 3.00

*.650 files contain protection, control settings, relay configuration and compiled logic
equations. This file can be retrieved from the relay, using the 

“File>Get info from

relay”

 option in EnerVista 650 Setup (through serial or Ethernet communication).

“File>Send info to relay”

 option stores this *.650 file in the relay.

Содержание Multilin W650















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Multilin W650

U-Line S-12741 Installation preview
S-12741
Бренд: U-Line Страницы: 3
Protecta REBEL Manual preview
REBEL
Бренд: Protecta Страницы: 4
Petzl AVAO BOD Technical Notice preview
AVAO BOD
Бренд: Petzl Страницы: 25
Zenith R56W28 Operating Manual preview
R56W28
Бренд: Zenith Страницы: 56
Waveguard Qi-Home Cell Operating Manual preview
Qi-Home Cell
Бренд: Waveguard Страницы: 74
Samsung HLS5679WX/XAA Brochure & Specs preview
HLS5679WX/XAA
Бренд: Samsung Страницы: 4
NEO TOOLS 97-512 Instruction Manual preview
97-512
Бренд: NEO TOOLS Страницы: 10
M-system 15SN Instruction Manual preview
15SN
Бренд: M-system Страницы: 2
Point 65 BOBLBEE 20L User Manual preview
BOBLBEE 20L
Бренд: Point 65 Страницы: 8
NPM PEGAS BeerCas User Manual preview
PEGAS BeerCas
Бренд: NPM Страницы: 8
Clas Ohlson 488109 Manual preview
488109
Бренд: Clas Ohlson Страницы: 4
Clas Ohlson Aloksak Instruction Manual preview
Aloksak
Бренд: Clas Ohlson Страницы: 5
Clas Ohlson 40-2024-1 Quick Start Manual preview
40-2024-1
Бренд: Clas Ohlson Страницы: 5
Clippasafe DVD & DigiBox Protector Instruction Manual preview
DVD & DigiBox Protector
Бренд: Clippasafe Страницы: 2
CXS ALTHEA Information For Users preview
ALTHEA
Бренд: CXS Страницы: 4
CXS 1110 004 200 00 Information For Users preview
1110 004 200 00
Бренд: CXS Страницы: 56
Seg WIC1 Reference Manual preview
WIC1
Бренд: Seg Страницы: 105

Бренды по названию

Популярные бренды

Загрузить еще бренды