manualshive.com logo in svg

GE Multilin W650, Инструкция по эксплуатации, Страница: 255 / 622

Поделиться
Скачать
GE Multilin W650 Скачать руководство пользователя страница 255

GEK-113032A

W650 Wind Generator Protection System

5-115

5 SETTINGS

5.8 RELAY CONFIGURATION

5

5.8.5 OSCILLOGRAPHY

This menu is used for selecting the digital channels to be included in oscillography records, and the oscillo trigger signal. As
for the above-described settings, the trigger selection can be any of the signals provided by the relay or a logic combination
of these.

settings are described below:

•

Select

 checkbox enables or disables a digital channel and the oscillography trigger.

•

Name

 setting defines the name of the digital channel to be included in oscillography records.

•

Source

 setting defines the source or signal to be recorded in that specific channel, which can be selected among all

the operands available in the signals menu.

•

NOT

 checkbox inverts the enabled digital channel signal.

•

OR

 checkbox to select a group of operands instead of a single one. The relay performs an OR of the signals, and its

output produces operation. 

Figure 5–40: OSCILLOGRAPHY CONFIGURATION

NOTE

 

This screen is used for the configuration of digital channels and oscillography trigger. The rest of parameters,
such as function enabling/disabling, sampling rate, number of oscillography files, etc. must be set on the

Setpoint > Product Setup > Oscillography

 menu.

Содержание Multilin W650















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов