manualshive.com logo in svg

GE Multilin 889, Инструкция по эксплуатации

Поделиться
Скачать
GE Multilin 889 Скачать руководство пользователя страница 104

3–26

889 GENERATOR PROTECTION SYSTEM – INSTRUCTION MANUAL

SOFTWARE INTERFACE

CHAPTER 3: INTERFACES

5.

For setpoints requiring non-numerical pre-set values (e.g. 

Phase VT Connection

 

below), clicking anywhere within the setpoint value box displays a drop-down 
selection menu arrow. Select the desired value from this list.

6.

In the 

Setpoints > System Setup > Voltage Sensing

 dialog box, click on 

Save

 to save 

the values into the 889. Click 

YES

 to accept any changes and exit the window. Click 

Restore

 to retain previous values. Click 

Default

 to restore Default values.

7.

For setpoints requiring an alphanumeric text string (e.g. "relay name"), the value may 
be entered directly within the setpoint value box.

File Support

Opening any file automatically launches the application or provides focus to the already 
opened application.
New files are automatically added to the tree.

Using Setpoints Files

The software interface supports three ways of handling changes to relay settings:
•

In off-line mode (relay disconnected) to create or edit relay settings files for later 
download to communicating relays.

•

Directly modifying relay settings while connected to a communicating relay, then 
saving the settings when complete.

•

Creating/editing settings files while connected to a communicating relay, then saving 
them to the relay when complete.

Settings files are organized on the basis of file names assigned by the user. A settings file 
contains data pertaining to the following types of relay settings:
•

Device Definition

•

Relay  Setup

•

System  Setup

•

Protection

•

Control 

•

Inputs/Outputs

•

Monitoring

•

FlexLogic

•

Quick  setup

•

Protection summary

•

IEC 61850 configurator

•

Modbus user map

Factory default values are supplied and can be restored after any changes.

Содержание Multilin 889





































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды