GE C60, Инструкция по эксплуатации

Страница: 641 / 682

GE Multilin C60 Breaker Protection System E-3
APPENDIX E E.1 OVERVIEW
E
Either the ASDUs of the set <2>, <4>, <6>, <8>, <10>, <12>, <14>, <16>, <17>, <18>, and <19> or of the set
<30> to <40> are used.
Process information in control direction
Either the ASDUs of the set <45> to <51> or of the set <58> to <64> are used.
System information in monitor direction
System information in control direction

<21> := Measured value, normalized value without quantity descriptor M_ME_ND_1

<30> := Single-point information with time tag CP56Time2a M_SP_TB_1

<31> := Double-point information with time tag CP56Time2a M_DP_TB_1

<32> := Step position information with time tag CP56Time2a M_ST_TB_1

<33> := Bitstring of 32 bits with time tag CP56Time2a M_BO_TB_1

<34> := Measured value, normalized value with time tag CP56Time2a M_ME_TD_1

<35> := Measured value, scaled value with time tag CP56Time2a M_ME_TE_1

<36> := Measured value, short floating point value with time tag CP56Time2a M_ME_TF_1

<37> := Integrated totals with time tag CP56Time2a M_IT_TB_1

<38> := Event of protection equipment with time tag CP56Time2a M_EP_TD_1

<39> := Packed start events of protection equipment with time tag CP56Time2a M_EP_TE_1

<40> := Packed output circuit information of protection equipment with time tag CP56Time2a M_EP_TF_1

<45> := Single command C_SC_NA_1

<46> := Double command C_DC_NA_1

<47> := Regulating step command C_RC_NA_1

<48> := Set point command, normalized value C_SE_NA_1

<49> := Set point command, scaled value C_SE_NB_1

<50> := Set point command, short floating point value C_SE_NC_1

<51> := Bitstring of 32 bits C_BO_NA_1

<58> := Single command with time tag CP56Time2a C_SC_TA_1

<59> := Double command with time tag CP56Time2a C_DC_TA_1

<60> := Regulating step command with time tag CP56Time2a C_RC_TA_1

<61> := Set point command, normalized value with time tag CP56Time2a C_SE_TA_1

<62> := Set point command, scaled value with time tag CP56Time2a C_SE_TB_1

<63> := Set point command, short floating point value with time tag CP56Time2a C_SE_TC_1

<64> := Bitstring of 32 bits with time tag CP56Time2a C_BO_TA_1
 <70> := End of initialization M_EI_NA_1

<100> := Interrogation command C_IC_NA_1

<101> := Counter interrogation command C_CI_NA_1

<102> := Read command C_RD_NA_1

<103> := Clock synchronization command (see Clause 7.6 in standard) C_CS_NA_1

<104> := Test command C_TS_NA_1

<105> := Reset process command C_RP_NA_1

<106> := Delay acquisition command C_CD_NA_1

<107> := Test command with time tag CP56Time2a C_TS_TA_1