manualshive.com logo in svg

GE C60, Инструкция по эксплуатации

Скачайте бесплатное руководство по быстрому запуску Fantini Cosmi C60 на manualshive.com. Этот мануал поможет вам быстро и легко начать использование продукта. Не теряйте время на поиск инструкций, просто скачайте и начните эксплуатацию сразу.

Поделиться
Скачать
background image

GE Multilin

C60 Breaker Protection System

5-21

5 SETTINGS

5.2 PRODUCT SETUP

5

Example:

 If this setting is "Yes" and an attempt is made to change settings or upgrade the firmware, the UR device denies

the setting changes and denies upgrading the firmware. If this setting is "No", the UR device accepts setting changes and
firmware upgrade.

This role is disabled by default.

FACTORY SERVICE MODE: 

   When enabled (meaning "Yes" is selected) the device can go into factory service mode. For

this setting to become enabled a Supervisor authentication is necessary. The default value is Disabled.

SUPERVISOR ROLE:

 When enabled (meaning "Yes" is selected) the Supervisor role is active. When "No" is selected this

role is disabled. To disabled this setting a Supervisor authentication is necessary. If disabled, the Supervisor role is not
allowed to log on. In this case the Administrator can change the settings under the Supervisory

 

menu.

If enabled, Supervisor authentication is required to change the settings in the Supervisory menu. If the Supervisor disables
his role after authentication, the Supervisor session remains valid until he switches to another role using MMI or until he
ends the current Supervisor session if using communications.

This role is disabled by default.

SERIAL INACTIVITY TIMEOUT

: The role logged via a serial port is auto logged off after the Serial Inactivity timer times

out. A separate timer is maintained for RS232 and RS485 connections. The default value is 1 minute.

a) SELF TESTS

PATH: SETTINGS 

 PRODUCT SETUP 

 SECURITY 



SUPERVISORY 

SELF TESTS

FAILED AUTHENTICATE

 — When Enabled, the number of failed authentications is compared with the Session Lockout

threshold. When the Session Lockout threshold is exceeded, a minor alarm indication comes up. Operand is 

AUTHENTICA-

TION FAIL

.

FIRMWARE LOCK

 — When Enabled, any firmware upgrade attempt brings up a minor self-test alarm. Operand is 

UNAUTH

FW ATTEMPT

.

SETTINGS LOCK

 — When Enabled, an unauthorized write attempt to a setting for a given role activates a minor self test

alarm. Operand is 

UNAUTH SETTING WRITE

.

PATH: SETTINGS 

 PRODUCT SETUP 

 SECURITY 



SUPERVISORY 

SELF TESTS 

FAILED AUTHENTICATE

CYBERSENTRY SETUP

When first using CyberSentry security, use the following procedure for set up.

1.

Log in to the relay as Administrator by using the Value keys on the front panel to enter the default password
"ChangeMe1#". Note that the "Lock relay" setting needs to be disabled in the 

Security > Supervisory

 menu. When

this setting is disabled, configuration and firmware upgrade are possible. By default, this setting is disabled.

2.

Enable the Supervisor role if you have a need for it.

3.

Make any required changes in configuration, such as setting a valid IP address for communication over Ethernet.

4.

Log out of the Administrator account by choosing None.

Next, device or server authentication can be chosen on the login screen, but the choice is available only in EnerVista. Use
device authentication to log in using the five pre-configured roles (Administrator, Supervisor, Engineer, Operator,
Observer). When using a serial connection, only device authentication is supported. When server authentication is
required, characteristics for communication with a RADIUS server must be configured. This is possible only in the EnerV-

 SELF TESTS

 

 FAILED

 AUTHENTICATE

See below

MESSAGE

FIRMWARE LOCK:

Enabled

Range: Enabled, Disabled 

MESSAGE

SETTINGS LOCK:

Enabled

Range: Enabled, Disabled

 FAILED

 AUTHENTICATE

FAILED AUTHENTICATE:

Enabled

Range: Enabled, Disabled

Содержание C60











































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для C60

GE Concord express Instruction Manual preview
Concord express
Бренд: GE Страницы: 3
Echelon Excel 50 Installation Instructions Manual preview
Excel 50
Бренд: Echelon Страницы: 40
M-Audio Axiom AIR 25 Service Manual preview
Axiom AIR 25
Бренд: M-Audio Страницы: 26
M Climate Bobbie Installation Instructions Manual preview
Bobbie
Бренд: M Climate Страницы: 12
Raypak RayTemp Installation & Operating Instructions Manual preview
RayTemp
Бренд: Raypak Страницы: 24
J+J S 20 Handbook preview
S 20
Бренд: J+J Страницы: 91
U.S. Divers Impulse Service & Repair Manual preview
Impulse
Бренд: U.S. Divers Страницы: 22
Zamel P-258/2 Instructions Manual preview
P-258/2
Бренд: Zamel Страницы: 23
Zamel P-256/8 Manual Instruction preview
P-256/8
Бренд: Zamel Страницы: 2
Zamel supla SRW-01 Quick Start Manual preview
supla SRW-01
Бренд: Zamel Страницы: 2
Zander Aachen SCB Series Operating Instructions Manual preview
SCB Series
Бренд: Zander Aachen Страницы: 44
Zamel Extra Free ROB-01/12-24V Manual Instruction preview
Extra Free ROB-01/12-24V
Бренд: Zamel Страницы: 2
Zamel ROW-01 Instruction Manual preview
ROW-01
Бренд: Zamel Страницы: 14
KaMo Pearldex Series Manual preview
Pearldex Series
Бренд: KaMo Страницы: 2
AMX VST-TSF Dimensional Drawing preview
VST-TSF
Бренд: AMX Страницы: 1
Click2Enter Click2Enter-I Operating & Installation Instructions Manual preview
Click2Enter-I
Бренд: Click2Enter Страницы: 34
Webasto SmarTemp Control fx Installation And Operation Instructions Manual preview
SmarTemp Control fx
Бренд: Webasto Страницы: 8
ETNA Hydropan-Single Operation And Maintenance Manual preview
Hydropan-Single
Бренд: ETNA Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды