manualshive.com logo in svg

GE C60, Инструкция по эксплуатации

Скачайте бесплатное руководство по быстрому запуску Fantini Cosmi C60 на manualshive.com. Этот мануал поможет вам быстро и легко начать использование продукта. Не теряйте время на поиск инструкций, просто скачайте и начните эксплуатацию сразу.

Поделиться
Скачать
background image

5-86

C60 Breaker Protection System

GE Multilin

5.2 PRODUCT SETUP

5 SETTINGS

5

The pulse duration of the remote set or local front panel pushbutton must be at least 50 ms to operate the pushbut-
ton. This allows the user-programmable pushbuttons to properly operate during power cycling events and various
system disturbances that can cause transient assertion of the operating signals.

The local and remote operation of each user-programmable pushbutton can be inhibited through the 

PUSHBTN 1 LOCAL

 and

PUSHBTN 1 REMOTE

 settings. If local inhibit is applied, the pushbutton ignores set and reset commands executed through

the front panel pushbuttons. If remote inhibit is applied, the pushbutton ignores set and reset commands executed through
FlexLogic operands.

The inhibit functions are not applied to the autoreset feature. The inhibit function can be used in SBO control operations to
prevent user-programmable pushbutton activation and ensuring “one-at-a-time” select operation.

The inhibit functions can also be used to prevent pushbutton activation from the accidental pressing of the front panel push-
buttons. The separate inhibit of the local and remote operation simplifies the implementation of local/remote control super-
vision.

Pushbutton states can be logged by the event recorder. User-defined messages can also be associated with each pushbut-
ton and displayed when the pushbutton is activated and when in latched mode when the pushbutton deactivated.

•

PUSHBUTTON 1 FUNCTION

: This setting selects the mode of the pushbutton (Self-Reset, Latched, Disabled). If set

to “Disabled,” the pushbutton is not active and the corresponding FlexLogic operands (both “On” and “Off”) are de-
asserted.

•

PUSHBTN 1 ID TEXT:

 This setting specifies the top 20-character line of the user-programmable pushbutton message

and is intended to provide ID information of the pushbutton. See the 

User-definable Displays

 section in this chapter for

instructions on how to enter alphanumeric characters from the keypad.

•

PUSHBTN 1 ON TEXT:

 This setting specifies the bottom 20-character line of the user-programmable message and is

displayed when the pushbutton is in the “on” position. See the 

User-definable Displays

 section for instructions on

entering alphanumeric characters from the keypad.

•

PUSHBTN 1 OFF TEXT:

 This setting specifies the bottom 20-character line of the user-programmable pushbutton

message and displays when the pushbutton is deactivated and the 

PUSHBUTTON 1 FUNCTION

 is “Latched”. A message

does not display when the 

PUSHBUTTON 1 FUNCTION

 is “Self-reset” as the pushbutton operand status is implied to be

“Off” upon its release. The length of the “Off” message is configured with the 

PRODUCT SETUP 



 DISPLAY PROPERTIES

 FLASH MESSAGE TIME 

setting.

•

PUSHBTN 1 HOLD

: This setting specifies the time required for a front panel pushbutton to be pressed before it is

deemed active. This timer is reset upon release of the pushbutton. Note that user-programmable pushbutton operation
requires the front panel pushbutton to be pressed a minimum of 50 ms. This minimum time is required prior to activat-
ing the user-programmable pushbutton hold timer.

•

PUSHBTN 1 SET

: This setting assigns the FlexLogic operand serving to activate the user-programmable pushbutton

element. The duration of the incoming set signal must be at least 50 ms.

•

PUSHBTN 1 RESET

: This setting assigns the FlexLogic operand serving to deactivate the user-programmable push-

button element. This setting is applicable only if the user-programmable pushbutton is in "Latched" mode.

•

PUSHBTN 1 AUTORST

: This setting enables the user-programmable pushbutton autoreset feature. This setting is

applicable only if the pushbutton is in “Latched” mode.

•

PUSHBTN 1 AUTORST DELAY

: This setting specifies the time delay for automatic reset of the pushbutton when in

"Latched" mode.

•

PUSHBTN 1 REMOTE

: This setting assigns the FlexLogic operand serving to inhibit user-programmable pushbutton

operation from the operand assigned to the 

PUSHBTN 1 SET

 or 

PUSHBTN 1 RESET

 settings.

•

PUSHBTN 1 LOCAL

: This setting assigns the FlexLogic operand serving to inhibit user-programmable pushbutton

operation from the front panel pushbuttons. This inhibit functionality is not applicable to pushbutton autoreset.

•

PUSHBTN 1 DROP-OUT TIME

: This setting applies only to “Self-Reset” mode and specifies the duration of the user-

programmable pushbutton active status after the front panel pushbutton has been released. When activated remotely,
this setting specifies the entire activation time of the pushbutton; the length of time the operand selected by PUSHBTN
1 SET remains on has no effect on the pulse duration.

•

PUSHBTN 1 LED CTL

: This setting assigns the FlexLogic operand serving to drive the front panel pushbutton LED. If

this setting is “Off”, then LED operation is directly linked to the 

PUSHBUTTON 1 ON

 operand.

NOTE

Содержание C60











































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для C60

Fairchild 63 Installation, Operation And Maintenance Instructions preview
63
Бренд: Fairchild Страницы: 2
Fagor 101 Operating Manual preview
101
Бренд: Fagor Страницы: 103
National Instruments SCXI -1122 Calibration Procedure preview
SCXI -1122
Бренд: National Instruments Страницы: 17
Davey Torrium 2 TT45 Installation And Operating Instructions Manual preview
Torrium 2 TT45
Бренд: Davey Страницы: 12
RKC INSTRUMENT FAREX SR MINI SYSTEM Communication Instruction Manual preview
FAREX SR MINI SYSTEM
Бренд: RKC INSTRUMENT Страницы: 82
M-system R7D-EC16B Instruction Manual preview
R7D-EC16B
Бренд: M-system Страницы: 7
Linak TR-EM-288-SPF Quick Manual preview
TR-EM-288-SPF
Бренд: Linak Страницы: 2
Bardiani Valvole BBZO BBZOG Instruction Manual preview
BBZO BBZOG
Бренд: Bardiani Valvole Страницы: 24
Woodward ProAct III Installation And Operation Manual preview
ProAct III
Бренд: Woodward Страницы: 32
Westfalia 31 13 24 Instruction Manual preview
31 13 24
Бренд: Westfalia Страницы: 18
Airmar Technology Corporation T42 Owner'S Manual & Installation Instructions preview
T42
Бренд: Airmar Technology Corporation Страницы: 4
Motorline professional MC41SP User& Installer'S Manual preview
MC41SP
Бренд: Motorline professional Страницы: 8
Swagelok BSH 10 Series User Manual preview
BSH 10 Series
Бренд: Swagelok Страницы: 20
V-ZUG 81 A Operating Instructions Manual preview
81 A
Бренд: V-ZUG Страницы: 24
ICP DAS USA ALM-04-MRTU User Manual preview
ALM-04-MRTU
Бренд: ICP DAS USA Страницы: 26
National Instruments cRIO-FRC II User Manual And Specifications preview
cRIO-FRC II
Бренд: National Instruments Страницы: 22
Baby Trend TS04 B Series Instruction Manual preview
TS04 B Series
Бренд: Baby Trend Страницы: 20
Guangdong Schen Investment RC-M2 User Manual preview
RC-M2
Бренд: Guangdong Schen Investment Страницы: 15

Бренды по названию

Популярные бренды

Загрузить еще бренды