Главная
/
Garmin
/
GTN 625
/
Руководство пилота

Garmin GTN 625, Руководство пилота

Поделиться

Страница: 514 / 610

Garmin GTN 625 Скачать руководство пользователя страница 514

15-24

GTN 625/635/650 Pilot’s Guide

190-01004-03 Rev. P

System

15.4.6 Crossfill

Dual units may be interfaced to crossfill information between the two units.

This option will not be available unless dual units are configured.

When Crossfill is turned on with one GTN, it is automatically turned on in the

other GTN. Some items are always crossfilled regardless of the crossfill setting;
others are dependent on the crossfill setting.

The GTN can be can also be interfaced with the GNS 400W/500W units. The

GTN can automatically send the Active Flight Plan and active Direct-To course to
the GNS unit. The GTN User Waypoints can be manually sent to the GNS unit. The
GNS unit can manually send its User Waypoints to the GTN unit. Waypoint names
longer than six characters, or duplicates, sent from the GTN unit to the GNS unit
will replace some characters with a "+" sign, while leaving significant characters to
aid in identification (such as, USR003 becomes US+003).

NOTE

: Upon crossfill being activated, the GTNs may take up to 10 seconds

to crossfill the flight plans. The pilot must verify the flight plan in each unit
prior to use. The GTN and GNS units must have databases with the same cycle.

NOTE

: When GPS navigation is lost in either unit, crossfilling may not be

available until GPS is restored in both units. Crossfilling will resume once the
flightplan is changed on one of the units or crossfill is re-enabled.

15.4.6.1 GTN-to-GTN Crossfilling

This data is always crossfilled:

• User waypoints
• Flight plan catalog
• Alerts (traffic pop-up acknowledgement, missed approach waypoint

pop-up acknowledgement, altitude leg pop-up acknowledgement)

• External sensors (transponder status and commands, synchro heading)
• System setup:

- User-defined NAV frequencies to store favorites
-  Date/Time convention
-  Nearest airport criteria
-  Units (Nav angle, Fuel, and Temperature)
-  User-defined COM frequencies to store favorites
-  CDI Scale setting
-  ILS CDI Capture setting

«
...
512
513
514
515
516
...
»

Содержание GTN 625



































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды