8-42
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
Map
8.5 OBS
The
OBS
key is used to select manual or automatic sequencing of waypoints.
OBS selection is available on the Default Navigation page. Touching this key
selects OBS mode, which retains the current “active to” waypoint as your
navigation reference even after passing the waypoint (i.e., prevents sequencing
to the next waypoint). Touching the
OBS
key again returns to normal operation,
with automatic sequencing of waypoints. Whenever OBS mode is selected, you
may set the desired course To/From a waypoint using the pop-up window on the
GTN 6XX or with the external OBS selector on your HSI or CDI.
For leg types that do not support OBS, this key will be shown as a SUSP key.
This key will then also function as an Unsuspend key for legs that auto-suspend,
such as holds, missed approaches, etc.
NOTE:
In dual GTN installations with crossfill on, the OBS course will only
be updated real time on the GTN that is receiving the new OBS course. The
course will be transferred to the other GTN when OBS is exited.
1. Touch the
OBS
key to enable the OBS function.
Touch the OBS
Key to Enable
OBS Function
OBS Function
Annunciation
OBS Heading
Active FPL Leg
GPS Level
Of Service
Figure 8-48 OBS Course Selection
2. Enter the desired OBS heading using the keypad and touch
Enter
.
3. The OBS heading will be shown in the flight plan annunciation
above the CDI in the lower portion of the display. The OBS
function annunciation will show.
Содержание GTN 625
Страница 608: ...This page intentionally left blank ...
Страница 609: ......
Страница 610: ...190 01004 03 Rev P ...
