5-1
190-01004-03 Rev. P
GTN 625/635/650 Pilot’s Guide
Direct-To
5 DIRECT-TO
The GTN 6XX Direct-To function can quickly set a course to any waypoint.
If the pilot selects Direct-To to a waypoint that is in the flight plan, waypoint
sequencing in the flight plan will resume upon reaching that waypoint. If the
pilot selects Direct-To for a waypoint that is not in the flight plan, the flight
plan will no longer be active but remains available. There are some fixes within
procedures for which if a Direct-To is selected then the approach will not be
active. For example, if you activate a Direct-To course to a waypoint between
the FAF and the MAP and go Direct-To to that waypoint then approach guidance
will not become active.
5.1
Direct-To Navigation
1. Press the
Direct-To
key on the right side of the unit.
Figure 5-1 Direct-To Wpt Page
2. Select
Waypoint
,
FPL
, or
NRST APT
window by touching the desired tab.
3. If a specific course is necessary, touch the
Course To
key.
Содержание GTN 625
Страница 608: ...This page intentionally left blank ...
Страница 609: ......
Страница 610: ...190 01004 03 Rev P ...