5-6
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
Direct-To
5.5
Direct-To Map Waypoint
A Direct-To course may be set to any waypoint selected on the Map page. The
waypoint is selected by touching an item such as an airport, VOR, or NDB or
any other location. Touching the map page at any place not having an existing
location name will create a waypoint with the name “MAPWPT.” Touching the
Direct-To
key will automatically insert the selected waypoint as the Direct-To
waypoint.
1. On the Map page, touch the map at the location intended to
be the Direct-To waypoint.
2. Press the
Direct-To
key on the right side of the unit.
Touch to Remove
the Direct-To
Course
Direct-To Waypoint Name
Waypoint Tab
Touch to Activate
the Direct-To
Course
Figure 5-9 Touch the Map to Create a MAPWPT as the Direct-To Course Destination
3. Touch the
Activate
key or press the
small right
knob to
activate the selection.
Содержание GTN 625
Страница 608: ...This page intentionally left blank ...
Страница 609: ......
Страница 610: ...190 01004 03 Rev P ...