4-19
190-01004-03 Rev. P
GTN 625/635/650 Pilot’s Guide
FPL
4. Touch the
Leg Length
key to open the keypad. Use the keypad
and
Enter
to select the length of the parallel track legs.
5. Touch the
TRK SPCNG
key to open the keypad. Use the keypad
and
Enter
to select the desired spacing between the parallel
track legs.
6. Touch the
Leg Count
key to open the keypad. Use the keypad
and
Enter
to select the desired number of parallel track legs.
7. Touch the
Preview
key to open a preview of the selected
pattern.
8. Touch the
Load Pattern
key to load selected pattern to the
active flight plan.
OR
9. Touch the
Load PTRN & Activate
key to load selected pattern
to the active flight plan and go direct-to the initial waypoint.
4.2.4.2
Creating a Sector Search Pattern
The Sector Search SAR pattern starts at the initial waypoint and follows the
initial track for the desired leg length. A 60° turn in the initial turn direction is
followed by another leg with the desired leg length, another 60° turn, and then
a leg back to the initiating waypoint. The next sector starts with a leg continuing
on the same course outbound from the initiating waypoint and is followed by
the same sequence of legs and turns. The third sector follows the same pattern.
The default initial track for the Sector Search Pattern is True North.
Touch to Select
Initial Track
Selected Initial Wpt
Touch to Select
SAR Pattern Type
Touch to Select
Initial Turn Direction
Touch to Select Leg Length
Touch to Load Selected Pattern
to the Active Flight Plan
Touch to Load
Selected Pattern to
the Active FPL And
Go Direct-To the First
Wpt in the Pattern
Touch to Preview
Selected Pattern
Figure 4-37 Search and Rescue Sector Search Pattern Page
Содержание GTN 625
Страница 608: ...This page intentionally left blank ...
Страница 609: ......
Страница 610: ...190 01004 03 Rev P ...
