79
Figure 4-75 SNMP (2)
Step 2 Select SNMP
version to enable SNMP.
Select
V1
, and the system can only process information of V1 version.
Select
V2
, and the system can only process information of V2 version.
Select
V3
, and then
V1
and
V2
become unavailable. You can configure user name,
password and authentication type. It requires corresponding user name, password
and authentication type to visit your device from the server.
Using
V1
and
V2
might cause data leakage, and
V3
is recommended.
In
Trap Address
, enter the IP address of the PC that has MIB Builder and MG-SOFT
MIB Browser installed, and leave other parameters to the default.
Table 4-27 Description of SNMP parameters
Parameter
Description
SNMP Port
The listening port of the software agent in the device.
Read
Community,
Write Community
The read and write community string that the software agent
supports.
You can enter number, letter, underline and dash to form the name.
Trap Address
The target address of the Trap information sent by the software agent
in the device.
Trap Port
The target port of the Trap information sent by the software agent in
the device.
