78
Figure 4-73 UPnP
Step 2 Select the
Enable
check box, and there are two mapping modes:
Custom
and
Default
.
Select
Custom
, click
and then you can modify external port as needed.
Select
Default
, and then the system finishes mapping with unoccupied port
automatically, and you cannot modify mapping relation.
Step 3 Click
Save
.
Open web browser on PC, enter http:// wide area IP address: external port number, and
then you can visit the local area device with corresponding port.
4.6.7 SNMP
SNMP (Simple Network Management Protocol), which can be used to enable software such as
MIB Builder and MG-SOFT MIB Browser to connect to the camera and manage and monitor
the camera.
Preparation
Install SNMP monitoring and managing tools such as MIB Builder and MG-SOFT MIB
Browser.
Get the MIB file of the matched version from technical support.
Procedure
Step 1 Select
Setting > Network > SNMP
.
The
SNMP
interface is displayed. See Figure 4-74 and Figure 4-75.
Figure 4-74 SNMP (1)
