91
Parameter
Description
Language
Select system language.
Video Standard
Select video standard from
PAL
and
NTSC
.
TVOut
Select
On
or
Off
. This function is available on models with analog
output.
If the TV out is
On
, smart plans will be disabled; if the smart plans
are enabled, the TV out will be set as
Off
.
SDI and HDCVI are available on select models.
Step 3 Click
Save
.
4.8.2 Date & Time
You can configure date and time format, time zone, current time, DST (Daylight Saving Time) or
NTP server.
Step 1 Select
Setting > System > General > Date & Time
.
The
Date & Time
interface is displayed. See Figure 4-89.
Figure 4-89 Date and time
Step 2 Configure date and time parameters. For details, see Table 4-36.
Table 4-36 Description of date and time parameters
Parameter
Description
Date Format
Configure the date format.
Time Format
Configure the time format. You can select from
12-Hour
or
24-Hour
.
Time Zone
Configure the time zone that the camera is at.
Current Time
Configure system time.
Click
Sync PC
, and the system time changes to the PC time.
DST
Enable DST as needed.
Select the check box, and configure start time and end time of DST with
Date
or
Week
.
NTP
Select the check box, and then NTP (network time protocol) is enabled,
the system then syncs time with the internet server in real time.
NTP Server.
