62
Figure 4-57 OSD info
Step 2 Configure OSD information. See Table 4-19.
Table 4-19 Description of OSD information
Parameter
Description
Preset
Select
Enable
, and the preset name is diaplayed in the image when the
camera turns to the preset, and it will disappear 3 s later.
Temperature
Select
Enable
and the internal temperature of the current device is
displayed.
Coordinates
Select
Enable
and the PTZ coordinates info is diaplayed in the image.
Zoom
Select
Enable
and the zoom info is displayed in the image. such as
, which means 12x zoom rate.
North
Select
Enable
and the north direction is displayed in the image.
RS485
Select
Enable
and it will enable RS-485 communication function.
Text
Select
Enable
and set text, and the text is displayed in the image.
Input Text
Text Align
Alignment mode of the displayed information in the image.
Step 3 Move the OSD box to the position you want in the image.
Step 4 Click
Save
.
4.5.2.3.9 Configuring Counting
The image displays statistics of the enter number and leave number. When the overlay function
is enabled during intelligent rules configuration, this function is enabled simultaneously.
Step 1 Select
Setting > Camera > Video > Overlay > Counting
.
The
Counting
interface is displayed. See Figure 4-58.
