132
Rule
Description
Applicable Scene
Crowd
gathering
When the crowd gathers or the crowd
density is large, the system performs
alarm linkages.
Scenes with medium or long distance,
such as outdoor plaza, government
entrance, station entrance and exit. It is
not suitable for short-distance view
analysis.
Loitering
detection
When the target loiters over the
shortest alarm time, the system
performs alarm linkages. After alarm
is triggered, if the target stay in the
area within the time interval of alarm,
then alarm will be triggered again.
Scenes such as park and hall.
Preparation
Select
Setting > Event > Smart Plan
, and enable
IVS
.
Select
Setting > Event > IVS > Global Setup
to finish global configuration, and then
configure
Fast Moving
rule.
Procedure
Configure IVS rules. This section takes tripwire as an example.
Go to the
Rule Config
interface of the speed dome, and the PTZ lock function is automatically
enabled. The locking time is 180 seconds. You can only manually control the PTZ during the
locking time. Click
Unlock
at lower left corner of the
Rule Config
interface to manually unlock
the PTZ, and click
Lock
again to relock the PTZ.
Step 1 Select
Setting > Event > IVS > Rule Config
.
The
Rule Config
interface is displayed.
Step 2 Click
, double-click the name to modify the rule name, and select
Tripwire
from the
Rule
Type
drop-down list. See Figure 5-22.
