105
When you access the camera through internet, the camera verifies the MAC address
according to the router MAC.
This section takes
Network Access
as an example.
Step 1 Select
Setting > System > Safety > Firewall
.
The
Firewall
interface is displayed. See Figure 4-109.
Figure 4-109 Firewall
Step 2 Select
Network Access
from
Rule Type
list, and then select the
Enable
check box.
Enable
PING prohibited
and
Prevent Semijoin
, and click
Save
. You do not need
to configure parameters.
Enable
Network Access
, and configure trust list and banned list.
1) Select the mode:
TrustList
and
BannedList
.
2) Click
Add IP/MAC
.
The
Add IP/MAC
interface is displayed. See Figure 4-110.
Figure 4-110 Add IP/MAC
Step 3 Configure parameters. For details, see Table 4-40.
Table 4-40 Description of adding IP/MAC parameters
Parameter
Description