111
Figure 5-2 Period
Step 2 Set arming periods. Alarms will be triggered in the time period in green on the timeline.
Method one: Directly press and drag the left mouse button on the timeline.
Method two: Enter an actual time period.
1) Click
Setting
next to a day.
2) Select a time period to be enabled.
3) Enter start time and end time of a time period.
Select
All
or check boxes of some days to set the time period of multiple days
at one time.
You can set 6 time periods per day.
Step 3 Click
Save
.
5.1.1.2 Record Linkage
The system can link record channel when an alarm event occurs. After alarm, the system stops
recording after an extended time period according to the
Record Delay
setting.
To use the record linkage function, set record plan for motion detection alarm and enable auto
recording in record control.
5.1.1.2.1 Setting Record Plan
After the corresponding alarm type (
Normal
,
Motion
,
Alarm
) is enabled, the record channel
links recording.
Step 1 Select
Setting > Storage > Schedule > Record
.
The
Record
interface is displayed. See Figure 5-3.
