Future Design MCTB 4.3, Руководство пользователя

Страница: 135 / 240

MCTB
135
User Right Menu Location Description
Default Configuration Device/Settings/Offline/System/
Configuration; Reset Default
Configuration button function to clear system configuration and reset all to
blank (default) state for reconfiguring
Exit (run mode) Device/Settings /Offline/System/Exit;
“Exit application. (automatic mode
startup).” button prevents MCTB application from being stopped
Exit to Configurator Device/Settings /Offline/System/Exit;
“Exit Application. (configuration mode
startup).” button prevents MCTB application from being stopped and
access to the MCTB configurator application
Cascade Device/Settings //Cascade Set cascade settings when cascade control enabled.
Calibrate Inputs Device/Settings /Offline/Calibrate Provides user offset calibration or full calibration of all
MCTB inputs.
7.4 Setting Security Options
The security
“Options” tab provides the administrator the ability to set the global security options.
Security is the global setting that turns the MCTB security system on or off. The security system must be
enabled for the audit trail to be enabled.
Audit is a global setting that turns the audit trail on or off. When the audit trail is turned on, all user actions are
written to a daily log.
When enabled,
Verification requires that the logged in user must log in again before the entry value will actually
be changed. This option is mutually exclusive with 2FA, i.e., only one can be enabled at a time.
Two-factor authentication (
2FA ) requires users to be added to the system with valid SMS numbers associated
to their personal devices. During log in, when 2FA is enabled, the system will send the user a verification code
that they must then enter to complete the log in process. See the following section regarding two-factor
authentication and its use.
IMPORTANT: In order for 2FA to function, the system must be connected to the internet and valid email server
settings must be entered (see section 9.8.3 Email Settings ). If the system does not have
internet access and/or email settings are not properly entered, the system will be unable to
send log in verification codes and users will not be able to log in to the system.
The
Password Aging Days field is a global for all users. Password aging starts from the day the user is
entered into the system. The value can be set from 0 to 365 days. A value of zero disables password aging.