manualshive.com logo in svg

Furuno FCV-38, Руководство пользователя

Поделиться
Скачать
Furuno FCV-38 Скачать руководство пользователя страница 94

4.  ADVANCED SETTINGS

4-12

Split menu

The [Split] menu contains settings for the [Std] and [Deep Mode] (1/2) split-beam dis-
plays. The table below shows the values at which the system switches between [Std] 
and [Deep Mode] (1/2).

[Deep Mode Start 
Range]

Sets the start range for the [Deep Mode]. When the depth becomes 
greater than this setting, the [Deep Mode] is enabled (provided 
[Deep Mode] is set to [Auto]. 

[Simul. TX]

Enables or disables simultaneous transmission in the split-beam 
mode. The screen is drawn faster in this mode, however unwanted 
echoes (false seabed echoes) may appear.
[Off]: Disables simultaneous transmission. (This is called alternat-
ing transmission.)
[Auto]: If the range is higher than set at [Simul. TX Start Range], all 
beams are transmitted simultaneously. If the range is lower than 
the set value, some beams will be transmitted simultaneously de-
pending on the beam direction setting. (This is called semi-simulta-
neous transmission.) The beams that are transmitting 
simultaneously can be judged by the color of the beam direction 
display “figure”. Beams transmitting simultaneously have the same 
color.
[On]: Enables simultaneous transmission.

Beam example: multi-beam 1 - multi-beam 5

[Simul. TX Start 
Range]

Sets the start range for simultaneous transmission, when [Simul. 
TX] is set to [Auto] or [On].

The sum of range value and shift value 

[Std] and [Deep Mode] (1/2) setting

Range is less than the [Deep Mode Start 
Range] setting in the [TX/RX] menu.

[Std] settings are used.

Range is greater than the [Deep Mode 
Start Range] setting in the [TX/RX] menu.

[Deep Mode 1] settings are used.

Range is greater than the [TRX Start 
Range] setting of [Deep Mode 2] in the 
[Split] menu.

[Deep Mode 2] settings are used.

Menu item

Description

1

1

1

1

1

4

1

3

5

2

3

2

1

1

2

Alternating

transmission

Five beams are

alternately transmitted

Some beams are

 simultaneously transmitted

Five beams are 

transmitted in succession

Semi-simultaneous

transmission

Simultaneous

transmission

Содержание FCV-38

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды