6. MAINTENANCE AND TROUBLESHOOTING
6-6
6.7
Tests Menu
You can run a diagnostic test, or view detailed information about your equipment, from
the [Tests] menu.
To access the [Tests] menu, do the following:
1. Click the [Advanced Settings] icon (
) from the InstantAccess bar™, then click
the [Advanced Settings] icon (
) to show the [Advanced Settings] window.
2. Click [Tests] to show the [Tests] menu, on the right-hand side of the window.
Processor Unit
System Error
P01
The voltage of the battery inside the Proces-
sor Unit is low. Turn the equipment off, then
contact your local dealer to request replace-
ment of the battery.
4
P02
The fan is in the Processor Unit is rotating too
slowly. Turn the equipment off, then contact
your local dealer to request replacement of
the fan.
5
P05
Multiple alike IP addresses found. Turn the
equipment off, then contact your local dealer
for advice. (IP address setup is in the [Ser-
vice] menu.)
6
Transceiver Unit
System Error
T01
Communication error between the Trans-
ceiver Unit and Processor Unit. Turn the
equipment off, then contact your local dealer
for service.
3
T03
The rotating speed of the FAN1 in the Trans-
ceiver Unit is abnormal. Turn the equipment
off, then contact your local dealer for service.
7
T04
The rotating speed of the FAN2 in the Trans-
ceiver Unit is abnormal. Turn the equipment
off, then contact your local dealer for service.
8
Error
Icon
Error name
Error
code
Reason, remedy
Priority
Order
* These items are for maintenance/service
purposes and are not accessed normally.
FCV-38[ver 0252473-xx.xx]
*
*
*
