4. ADVANCED SETTINGS
4-22
[Mode Select] window items
*1
[ZM] is selectable after selecting [SB]. Also not displayed when the [Zoom Win-
dow Display] checkbox is checked.
*2
Displayed only when [External Fish Finder Window] is set to [Off] at installation.
4. To add the zoom window display to a mode, check the [Zoom Window Display]
checkbox. The zoom window display is not available when SB is selected at step
3. The same applies to when [ZM] is selected.
5. Click [OK] to apply the changes to the mode selected at step 1 and close the
menu. Click [Cancel] to cancel any changes made and close the menu.
How to edit a mode
You can edit the contents of a display mode at any time. To edit a mode, do the fol-
lowing:
Note:
Display modes cannot be edited while echo data is being recorded in NetCDF4
format.
1. With the [Mode] menu displayed, select the display mode you wish to edit, from
the Mode list, with the applicable (
) button.
2. Use the [Mode Select] and [Display Division] windows to edit the mode as re-
quired.
3. Click [OK] to apply the changes and close the menu. Click [Cancel] to cancel any
changes made and close the menu.
How to delete a mode
1. With the [Mode] menu displayed, select the display mode you wish to edit, from
the Mode list, with the applicable (
) button.
2. Click the [Delete] button at bottom-left side of the screen to delete selected mode.
[Mode Select]
window items
Description
[---]
No selection.
[SB]
Split Beam display.
[B1] - [B5]
Beams 1 through 5.
[ZM]
*1
Zoom display for split beam.
[HE]
*2
External sounder’s high frequency display.
[LE]
*2
External sounder’s low frequency display.
