Full Spectrum Laser MUSE TITAM, Руководство по эксплуатации

Страница: 27 / 87

Autofocus Properties
Auto focus can be run via the touchscreen or will function automatically at the beginning of each job.
The auto focus will also retract to get out of the way of anything in your workspace when doing a camera
capture of your work area.
Standard Function : When running a laser job proper Autofocus function should go to the center of your
design, lower the laser cone until it makes contact with your material, then lift up to a given proper focal
measurement.
Faulty: If your autofocus receives a false positive and stops short your laser will be out of focus when running
a job. If this occurs you will need to double check that the laser head belt and mechanical components are
clean and clear of debris. If this continues to happen you will need to contact support via:
support@fslaser.com
26