Full Spectrum Laser MUSE TITAM, Руководство по эксплуатации

Страница: 74 / 87

Section VIII. Hardware & Maintenance
With a little care and maintenance, you Muse Titan Laser Cutter will remain clean and continue to run at top
efficiency for years to come. Be aware of all safety and maintenance issues with your machine by following all
the safety instructions in this manual.
Replacing the Laser Tube
This section provides procedures and a walkthrough to replace the laser tube on your Muse Titan. Although it
should last for hundreds of projects, the laser tube is considered a consumable and will eventually need to be
replaced. Please carefully read all instructions before beginning the replacement procedure as there are
several critical steps which must be properly followed to avoid breaking the laser tube. The included pictures
show how to properly connect wires to the tube’s electrodes and secure the connections.
Required Parts and Tools
● 75W/90W/100W Replacement Tube
● 2.5 mm Hex Wrench
The capacitors in the power supply retain power even after turning the
laser off. To ensure your safety, turn off the laser, remove the power cord
and wait at least 1 hour before accessing the power supply.
The Laser Tube Glass is fragile. Pulling on the tube wires will break your
laser tube at the neck. The water connections are very fragile. Do not
pull or force the connection tubes— gently work the tubes off of the
connectors
73